More power reserves make the 312 stereo amplifier sound even more dynamic than its predecessor.
Highlights
New power supply
Four new cutting-edge switched-mode power supplies modules deliver 1,200 VA of continuous power for the power amplfier section with a peak power capability of up to 4’200 VA for more than 5 seconds. They feature high performance filtering at the input and output, and high speed soulution voltage regulators to deliver considerably more stable power than any conventional, transformer-based technology.
Power amplifier
The amplification circuit of the 312 is based on the technology used in our Series 5 amplifiers. Current amplification is done in three stages, each with a narrow, almost linear operating range.
Operation
The 312 stereo amplifier is operated via its front panel button. Multiple configuration functions allow optimisation of the entire audio system.
Specifications
Shortcode
Mains | 100– 240 V (50 – 60 Hz) |
Power consumption | < 0.5 W Standby idle 110W |
Analog inputs | 1 × balanced (XLR) |
Input impedance | 2 kΩ balanced (XLR) |
LINK (remote turn-on) | 2 x phone jack (3.5mm) |
Loudspeaker | 2 pair loudspeaker binding posts |
Gain | + 26 dB |
Power output | 120 W @ 8 Ω 240 W @ 4 Ω 480 W @ 2 Ω (< 5 sec.) |
Output current max | 30 A |
Frequency response (– 3 dB) | 0 – 800 kHz |
Phase shift @ 20kHz | < - 3° |
THD | < 0.0004% |
Spot noise (input related) | < -140 dBV/√Hz |
Damping factor | > 5000 |
Dimensions (WxDxH) | 430 x 490 x 142 mm |
Weight | ~17 kg |